Calibrated Testing Equipments
Work We Do !
To Consulting services in electrical Engineering towards the successful completion of any related work like Electrical drawing, Bill of material, Execution of HT/LT installation, permission from Various agencies. We carry out Transformer Oil Filtration on site and all Testing work like Cables, relays, CT/PT, transformer-Oil, CBs, Isolators etc.
Our Mission
The Company offer Consulting services in electrical Engineering towards the successful completion of any related work like Electrical drawing, Bill of material, Execution of HT/LT installation, permission from Various agencies. We carry out Transformer Oil Filtration on site and all Testing work like Cables, relays, CT/PT, transformer-Oil, CBs, Isolators etc.
Relay Test Equipment
The multiple protection function of today’s protection relay systems requires a new level of sophisticated test hardware and software to completely analyze the operation of the unit in a “real life” situation.
Primary Injection Test Equipment
Primary injection sets are a perfect solution, as the range of products are situated between the two options previously mentioned. The primary injection equipment manufactured by SMC is a large range of products that meet the power.
Transformer Oil Test Equipments
The insulation oil of voltage- and current-transformers fulfills the purpose of insulating as well as cooling. Thus, the dielectric quality of transformer oil is a matter of secure operation of a transformer.
Testing Lab for Oil parameters
If you operate a large remote facility with multiple, high value lubricated assets then this option deserves serious consideration. Can be used with the Parker Kittiwake Heated Viscometer and ANALEX fdMplus for additional viscosity and wear debris data. A rugged, automated, full function IR based analysis lab On-Site.
Oil Filtration Machine – New Model.
filtration is using some method to remove suspended contamination from oil for either the protection of equipment (screening) or extending the life of the oil (cleaning). The solutions to oil filtration are not so simple and that’s where the confusion begins.
High Voltage Tester 0 – 5000 Volt.
A hipot test (also called Dielectric Withstanding Voltage (DWV) test) verifies that the insulation of a product or component is sufficient to protect the operator from electrical shock. In a typical hipot test, high voltage is applied between a product’s current-carrying conductors and its metallic shielding.
Megger 5000, 1000 & 500 Volt.
Insulation resistance quality of an electrical system degrades with time, environment condition i.e. temperature, humidity, moisture & dust particles. It also get impacted negatively due to the presence of electrical & mechanical stress, so it’s become very necessary to check the IR.
Earth Tester 0 – 30 Ohms.
AEMC Instruments makes several ground resistance testers, including clamp-on models, 3-point models, 4-point models, and multi-function models which offer direct readings, measures from 0.01 to 99,000 ohms and is auto-ranging.
Voltmeter 0 – 100 V
A voltmeter is an instrument used for measuring electrical potential difference between two points in an electric circuit. Analog voltmeters move a pointer across a scale in proportion to the voltage of the circuit; digital voltmeters give a numerical display of voltage by use of an analog to digital converter.
Ammeter 0 – 500 A
An ammeter is a measuring instrument used to measure the electric current in a circuit. Electric currents are measured in amperes (A), hence the name. Instruments used to measure smaller currents, in the milliampere or microampere range, are designated as milliammeters or microammeters.
Tong Tester 0 – 1000 A
In electrical and electronic engineering, a current clamp or current probe is an electrical device having two jaws which open to allow clamping around an electrical conductor. This allows the electrical current in the conductor to be measured, without having to make physical contact with it.
Multimeter Digital Motwani 3.5 Digit
3.5-digit (6000-count dual display, 31-segment bar graph display), RMS type Measurement Functions: Voltage, Current, Resistance, Continuity Check, Diode Test, Frequency, Capacitance, Temperature.
Digital Micro Ohm Meter 0 – 20 Kilo Ohms
The Digital Microohm Meter OR CR Meter (Conductor Resistence Meter) is a precision instrument, which is extremely suitable for measurement of low value resistance.The instrument uses state of art technology for measurement of low values of resistances.
Electronic Timer
A timer may have many functions and applications within manufacturing processes. Eagle Signal’s electronic timer and electromechanical timer products are designed primarily to track or control time-based applications such as run-time and event processes.
Tachometer
A tachometer (revolution-counter, tach, rev-counter, RPM gauge) is an instrument measuring the rotation speed of a shaft or disk, as in a motor or other machine. The device usually displays the revolutions per minute (RPM) on a calibrated analogue dial.
Phase Sequence Meter
Phase sequence meter is used for detecting the sequence of the supply in three-phase electric circuits. Since the direction of rotation of three phase electric motors can be changed by changing the phase sequence of supply.
Frequency Meter
A frequency meter is an instrument that displays the frequency of a periodic electrical signal. Various types of frequency meters are used. Many are instruments of the deflection type.
